Artesyn launches 75 W high current DC-DC converter for telecom

By : |January 6, 2015 0
The AVO75 series can deliver up to 25 A output current and a single adjustable output between 1.2 and 12 V from a 2:1 wide range input of 36 to 75 V

HONG KONG: Artesyn Embedded Technologies announced the AVO75 series, new 75 W fully-regulated eigth-brick dc-dc converters that bring high efficiency and thermal performance to cost-sensitive, small space, high current and low voltage telecom network infrastructure applications.

Artesyn

The AVO75 series is capable of delivering up to 25 A output current and a single adjustable output between 1.2 and 12 V from a 2:1 wide range input of 36 to 75 V.

Above 92 percent efficiency and excellent thermal performance in an operating range of minus 40 to 85 degrees Celsius makes the AVO75 series an ideal choice to supply power where the highest efficiency is demanded by network equipment manufacters and carriers.

For example, these units can deliver their full usable output power from a 48 V input at 55 degrees Celsius ambient temperature with a standard 200 linear feet per minute (LFM) airflow cooling.

A range of special features makes Artesyn’s new AVO75 series converters easy to design and deploy, including low ripple and noise, fixed switching frequency, high capacitive load capability, pre-bias start-up capability, output voltage remote sense.

They are protected against overcurrent, over-temperature and over-voltage conditions. The converters also have an enable pin on the primary side of the converter and remote-sense features and output voltage adjust function on the secondary side.

No Comments so fars

Jump into a conversation

No Comments Yet!

You can be the one to start a conversation.